19
Operating and installation instructions
RF-KIT Power Amplifier RF2K-S
6.4 Automatic tuning
For automatic detection and to save a tuner configuration and settings
for a given antenna / frequency combination, proceed as follows:
►
Tap at switching area Tuner Mode until the the switching area
appears
red
and “MAN“ will be displayed.
►
If the antenna tuner is bypassed, tap at switching area Bypass until
“L“ and “C“ are displayed.
►
Adjust input power between minimal 4 W and maximal 39 W.
►
Tap at switching area Tune. The color of the switching area changes
from
dark blue
to
light blue
, indicating that the antenna tuner is
now active.
A full tuning process is triggered by a longer touch (about 1 s) of swit-
ching area Tune:
A completely empty database requires a full tuning process that includes
all possible values and configurations; this tuning process takes about 28 s.
A normal tuning process is triggered by a tap at switching area Tune:
With already determined settings for frequencies that do not deviate
from the current working frequency by more than twice a segment size,
approx. 8 s are sufficient for a normal tuning process.
(At present, memory segmentation and querying the neighboring seg-
ments is not yet possible. The function will be activated in one of the next
firmware versions as part of an update).
An automatic tuning process will be performed and the settings of a suc-
cessful tuning will be stored in a database assigned to the antenna socket
used.
The results of the tuning can be seen by the value for SWR displayed in
indication area SWR.
►
Tap at switching area Store to save the settings for the current
antenna / frequency combination.
Switching area Store flashes 2x briefly to indicate the storing process.
