10
Operating and installation instructions
RF-KIT Power Amplifier RF2K-S
Sleep Timer
►
The Sleep Timer is activated/deactivated by (multiple) touching this
switching area (Sleep Timer activated “On“ / deactivated “Off“)
Sleep Timer Duration
►
By touching the switching areas “<“ or “>“ the Sleep Timer can be
adjusted.
If there is no operation during the set duration, the unit switches to stand-
by mode (Stand By) after the set duration has expired. Each activity via
the Touch screen (2) resets the Sleep Timer to the set duration and the
countdown to Stand By starts again.
Memory Bank
Only one Memory Bank can be activated at a time.
►
Select the currently active Memory Bank by clicking on one of the
three circular fields. The currently active Memory Bank is indicated by a
filled circle field.
A Memory Bank contains the number and all determined setting data
of the Antennas assigned to it. Clearing a Memory Bank only clears the
antenna tuner setting data determined in connection with this specific
Memory Bank for all Antenna Sockets assigned to the Memory Bank.
The contents of the other two Memory Banks remain untouched.
Erase
Memory Bank
►
By clicking on one of the three circular fields, the contents of the cor-
responding
Memory Bank are deleted.
NOTE!
Contents are deleted in any case and regardless
of whether the corresponding memory bank is
currently activated.
Tuner
►
The Antenna Tuner is activated/deactivated by (multiple) touching
this switching area
(Antenna Tuner activated “On“ / deactivated “Off“)
Clear
Antenna
Clears the Antenna Tuner Setting Values of an Antenna Socket within a
currently active Memory Bank.
►
Deleting the Antenna Tuner Setting Values of an Antenna
Connector by touching the switching area Garbage Can.
Further submenus are:
- Antennas
- Update
- Calibration
- VNC
- Interface
