- 20 -
MI-81343, UMI-81464, DXE-NSBT8, DXE-NMBT8 - Never-Seez
®
& Anti-Seize
An Anti-seize compound MUST be used on any Stainless Steel nuts, bolts, clamps or other
hardware to prevent galling and thread seizure. Any of these products can be used for this
purpose.
*
UMI-81343
Anti-Seize, 1 oz. Squeeze Tube
*
UMI-81464
Anti-Seize, 8.5 oz. Aerosol Can
*
DXE-NSBT8
Never-Seez
®
, 8 oz. Brush Top
*
DXE-NMBT8
Never-Seez
®
, 8 oz. Brush Top, Marine Grade
*
These products are limited to domestic UPS Ground shipping only
DXE-RADP-3 - Radial Plate, Stainless Steel w/ 20 Sets of SS Radial Attachment Hardware
The patented DX Engineering Radial Plate is meant for those of you that have or are building a quarter wave
vertical antenna and who want an easy, neat and effective way to connect those essential
radial wires and the coax to your vertical antenna for the lowest takeoff angle and strongest
signals. The DX Engineering Radial Plate is laser cut from tough stainless steel so that it has
smooth edges, won’t corrode and will always look good. You will be proud of how good
your installation looks. This plate will work perfectly with DX Engineering and Comtek
vertical antenna systems as well as most commercially available vertical antennas such as the
Hustler BTV series (4-BTV thru the 6-BTV), the SteppIR (BiggIR or SmallIR) or one of
your own construction
Technical Support
If you have questions about this product, or if you experience difficulties during the installation, contact DX
Engineering at (330) 572-3200. You can also e-mail us at:
For best service, please take a few minutes to review this manual before you call.
Warranty
All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from
date of shipment. DX Engineering’s sole obligation under these warranties shall be to issue credit, repair or replace any item or part thereof which is
proved to be other than as warranted; no allowance shall be made for any labor charges of Buyer for replacement of parts, adjustment or repairs, or
any other work, unless such charges are authorized in advance by DX Engineering. If DX Engineering’s products are claimed to be defective in
material or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping instructions for return to DX Engineering (transportation-
charges prepaid by Buyer). Every such claim for breach of these warranties shall be deemed to be waived by Buyer unless made in writing. The above
warranties shall not extend to any products or parts thereof which have been subjected to any misuse or neglect, damaged by accident, rendered
defective by reason of improper installation, damaged from severe weather including floods, or abnormal environmental conditions such as prolonged
exposure to corrosives or power surges, or by the performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts
thereof furnished by Buyer or acquired from others at Buyer’s specifications. In addition, DX Engineering’s warranties do not extend to other
equipment and parts manufactured by others except to the extent of the original manufacturer’s warranty to DX Engineering. The obligations under
the foregoing warranties are limited to the precise terms thereof. These warranties provide exclusive remedies, expressly in lieu of all other remedies
including claims for special or consequential damages. SELLER NEITHER MAKES NOR ASSUMES ANY OTHER WARRANTY
WHATSOEVER, WHETHER EXPRESS, STATUTORY, OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND
FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY NOT STRICTLY
IN ACCORDANCE WITH THE FOREGOING.
©DX Engineering 2013
DX Engineering®, DXE®, DX Engineering, Inc.®, Hot Rodz®, Maxi-Core®, DX Engineering THUNDERBOLT®, DX Engineering Yagi
Mechanical®, EZ-BUILD®, TELREX® and Gorilla Grip® Stainless Steel Boom Clamps, are trademarks of PDS Electronics, Inc. No license to use
or reproduce any of these trademarks or other trademarks is given or implied. All other brands and product names are the trademarks of their
respective owners.
Specifications subject to change without notice
.
