- 16 -
DXE-TB-7P with Comtek 30 and 40 Meter
Verticals:
The Comtek adapter plate allows the Comtek 30 or 40 Meter Vertical antenna to attach to the Tilt
Base. Install four Tilt Base 1/4-20 x 1-3/4” long Hex Head Bolts, four flat washers, four split lock
washers, four spacers and four hex nuts to the
TB-7P
adapter plate as shown in
Figure 13
.
Figure 13
On the Comtek antenna base, remove the 2” U-Bolts that hold the antenna to the Aluminum Base.
Set the original aluminum plate , U-Bolts and U-Bolt
hardware aside - they will not be re-used.
The aluminum saddles
will
be re-used.
Figure 14
