- 6 -
Attaching the included Ground Radial Wires to the Radial Plate
Using the 20 sets of supplied 1/4" stainless steel hardware (Bolt, Star Washer, Flat Washer, Split
Washer, Nut) connect the included
DXE-RADW-32RT
Pre-Assembled Radial Wire Kit ground
radial wires to the
DXE-RADP-3
Radial Plate as shown in
Figure 2
. Additional hardware kits are
available (
DXE-RADP-1HWK
) that contain 20 sets of Radial Plate Hardware are available in case
you loose some hardware, or decide to add more radial wires.
Space the radials out evenly around the Radial Plate. The Radial Plate will accommodate up to 60
radial wires (60 laser drilled holes), or up to 120 radials if doubled up.
Radial Wire Pattern
Figure 2 - Radial Wire Hardware Installation
