- 18 -
Optional Accessory Items
JTL-12555 Jet-Lube
™
SS-30 Pure Copper Anti-Seize
Jet-Lube
™
SS-30 Pure Copper Anti-Seize is the top choice of engineers and technicians in government, industry and leading Amateur
Radio contest stations, for protecting mechanical assemblies of aluminum tubing, general hardware and copper grounding
systems. On bonded metal surfaces Jet-Lube
™
SS-30 assures electrical and RF conductivity while preventing oxidation
and corrosion. Surpassing the capabilities of other aluminum anti-oxidants, the wide temperature range of Jet-Lube
™
SS-
30 prevents long-term drying and caking, and allows easy disassembly and effortless cleaning of parts. An
environmentally preferred thread lubricant and conductive termination compound, Jet-Lube
™
SS-30 helps keep your
equipment in serviceable condition. It contains a high concentration of copper flakes, a requirement for heavy loads or
compression; controlled frictional characteristics allow the surfaces of nuts and bolts to be tightened to their design torque
specifications. This anti-seize product assures full hydraulic efficiency by allowing the metal surfaces to slide over each
other without damaging metal-to-metal contact. Jet-Lube
™
SS-30 is also designed to work as a similar and dissimilar
component between two metal surfaces to prevent seizing and galvanic action. The SS-30 compound formula improves
conductivity and ground continuity - and will not melt in high temperatures. Features include:
* Meets MIL-PRF-907E spec
* K-factor: 0.13
* Service rating: -65 degrees F (-54 degrees C) to 1800 degrees F (820 degrees C)
* SS-30 Resistivity (ohm-CM x 108) 5
* This product is limited to domestic UPS Ground shipping only
DXE-KIT-DBR - DX Engineering Tube Deburring Tool Kit
Designed and manufactured in the USA, DX Engineering Tube Deburring Tools feature hardened steel cutting
surfaces arranged in a conical shape. Both the interior and exterior of the tool's cone may be used to smooth the rough
edges of the inside and outside of the cut ends of pipe and tubing. Its rotational symmetry allows easy reaming and
deburring rough-cut tubing edges with minimum effort. The
DXE-UT-2125
is usable on all tubing and pipe sizes
from 3/8” to 2-1/8” OD. The
DXE-UT-3500
covers sizes from 1-7/8” to 3-1/2” OD. The complete tool kit, model
DXE-UT-KIT-DBR
, includes both sizes of conical tools, a small hand deburrer and a half round file. DX
Engineering Tube Deburring Tools are reversible, so they are ideal to debur both ID and OD of aluminum tubing
prior to telescoping the sections together. These tools assure a smooth fit without galling and seizing that can occur
with the slightest roughness. Only a couple of revolutions with very light pressure is needed to produce excellent
results. DX Engineering Tube Deburring Tools may be used to debur tubing and pipe made of aluminum, fiberglass,
copper, steel, plastic pipe, etc.
DXE-STPL - Radial Wire Anchor Pins, 100/pack - No need to bury your radials!
DX Engineering Radial Wire Anchor Pins are perfect for fastening radials below the grass line to eliminate the risk of damaging your
radials during lawn maintenance.
•
100 count - 6'' Pins
•
11-Gauge
DXE-STPL-100P
Radial Wire Anchor Pins, 100/pack
DXE-STPL-300P
Radial Wire Anchor Pins, 300/pack
TES-2155 - 3M Temflex™ 2155 Rubber Splicing Tape
.
Conformable self-fusing rubber electrical insulating tape. It is designed for low voltage electrical insulating and moisture
sealing applications. For outdoor use, it should be protected from UV deterioration with an overwrap of
TES-06132
TES-06132 - Scotch® Super 33+
.
Highly conformable super stretchy tape for all weather applications. This tape provides flexibility and easy handling for
all around performance. It also combines PVC backing with excellent electrical insulating properties to provide primary
electrical insulation for splices up to 600V and protective jacketing.
