- 2 -
Keep your distance! Remember the 10-foot rule: When carrying and using ladders and other long
tools, keep them at least 10 feet away from all overhead lines - including any lines from the power
pole to your home.
Tools Required
Two 7/16” wrenches, (one of them should be open-end)
5/16”, 3/8”, 7/16”, and 1/2” wrenches or
5/16”, 3/8”, 7/16”, and 1/2” sockets and drive
Medium size flat blade screwdriver or 5/16” nut driver for the element clamps
Medium size flat blade screwdriver or 1/4” nut driver for the smaller element clamps
Tape measure
Black Felt-tip marker
DXE-MBV-2 Parts List
Description
Quantity
Description
Quantity
Tilt Base Assembly
(patented)
Antenna Assembly
Tilt Base, 3/16" Laser Cut Stainless Steel
1
2.00 x 0.125" x 36" Tube. Drilled
1
DXE-SSVC-2P V-Bolt Saddle Clamp
2
2.125" x 0.058" x 36" Tube. (Split both ends)
1
Tilt Base, Mast Mount Channel
1
2.000" x 0.058" x 72" Tube. (Split one end)
1
Tilt Base Plate
1
1.875" x 0.058" x 72" Tube. (Split one end)
1
1/4-20 x 2" HH Bolt, full thread
4
1.750" x 0.058" x 36" Tube. (Split one end)
1
1/4" Flat Washer
4
1.625" x 0.058" x 36" Tube. (Split one end)
1
1/4" Split Washer
4
1.500" x 0.058" x 36" Tube. (Split one end)
1
1/4" Dia. X 1/4" x 1/2" OD Alum. Spacer
4
1.375" x 0.058" x 36" Tube. (Split one end)
1
1/4-20 Hex nut
4
1.250" x 0.058" x 36" Tube. (Split one end)
1
1/4" Fender Washer, 1" OD
4
1.125" x 0.058" x 36" Tube. (Split one end)
1
1/4-20 Flanged Nut
2
1.000" x 0.058" x 36" Tube. (Split one end)
1
1/4-20 Nyloc nut
4
0.875" x 0.058" x 36" Tube. (Split one end)
1
3/8" U-Bolt Kits
2
0.750" x 0.058" x 36" Tube. (Split one end)
1
0.625" x 0.058" x 36" Tube. (Split one end)
1
Feedpoint Connection
0.500" x 0.058" x 36" Tube. (Split one end)
1
1/4-20 x 1" HH Bolt, full thread
1
0.375" x 0.058" x 36" Tube. (Plain)
1
1/4" External Tooth Washer
2
DXE-ECL-0500 - Element Clamp
1
1/4" Flat Washer
2
DXE-ECL-0625 - Element Clamp
1
1/4-20 Hex nut
2
DXE-ECL-0875 - Element Clamp
2
DXE-ECL-1000 - Element Clamp
2
Radial Wire System
DXE-ECL-1250 - Element Clamp
1
DXE-1023 RF Bulkhead Type N-Adapter
1
DXE-ECL-1500 - Element Clamp
2
DXE-FP-WIRE-N Feedpoint w/ N-Conn.
1
DXE-ECL-1750 - Element Clamp
2
DXE-RADP-3 Radial Plate w/hardware
1
DXE-ECL-2000 - Element Clamp
2
DXE-SSVC-2P V-Bolt Saddle Clamp
1
DXE-ECL-2250 - Element Clamp
2
Radial Wire Kit - 20 Radials w Term-32 ft
1 Kit
Black Vinyl Cap, 0.343" ID
1
Manual Updates
Every effort is made to supply the latest manual revision with each product. Occasionally a manual
will be updated between the time your DX Engineering product is shipped and when you receive it.
Please check the DX Engineering web site (
www.dxengineering.com
) or contact DX Engineering
by e-mail at:
for the latest revision manual.
