5 9
WEBVIEWER*
S e t u p > S y s t e m L o g > R e m o t e L o g S e t t i n g s
T h e S y s t e m L o g d i s p l a y s s y s t e m a n d e v e n t d e t a i l s .
The System and/or Event log data can be sent to another server. The syslog service is used to
send the message data, and the camera will use UDP port 514 (syslog protocol) to transmit the
data.
The remote server which will receive messages must have an application which will receive and
manage the syslog messages. If using Windows, an application such as Kiwi Syslog Server or
Splunk can be used to receive and manage the data.
To enable remote logging,:
Check the Enable box
Provide the corresponding log server
IP address.
* The
remote server’s firewall or a router may block incoming UDP syslog traffic from the camera.
If
the remote server’s monitoring application is not receiving message data from the camera,
verify the router or firewall are not blocking incoming traffic.
