DVS Pronto4K, Hardware Manual

Page: 35 / 74

2-17
Overview
2
1
3
I
4
5
A
VGA
The on-board graphics card of the motherboard may not be sufficient
to handle digital video. Then the system will be equipped with an addi-
tional graphics card. The VGA panel is the panel of this graphics card.
If available, the monitor for the Pronto4K software has to be connected
here.
For further information about the graphics card, please refer to the orig-
inal manufacturer’s documentation included in the delivery of
Pronto4K.
HDMI Panel
The HDMI panel of Pronto4K provides the high-definition multimedia
interfaces (HDMI connectors) for an output of digital audio and video
signals.
Figure 2-15: HDMI panel
If the VGA panel is present in your system, the VGA connector
available on the ATX connector panel will not be operational
(see section “ATX Connector Panel” on page 2-15).
To connect to DVI ports an HDMI-to-DVI adapter has to be
used.
Pin-outs of the HDMI connectors can be found in section “Sig-
nal In- and Outputs” on page A-9.
HDMI A (1.4a)
HDMI B
HDMI C
HDMI D