DVR 12-CH, User Manual

Page: 51 / 130

46
9.Then click “ Add ” .
10.Click “ Apply ” , and “ OK ” .
Alarm Message Triggering
Alarm Message may show additional information at the time of detecting
the alarm condition. Follow the instructions below to set the Alarm Message.
1.Click the “ Alarm ” Tab first.
2.Select the “ Camera ”, “ Din ” ,“ Disk full ”. “ Disk failure ”, or “ No
Signal ” .
3.Select a “ Trigger Period ”.
4.Click the “ Message ” Tab.
Figure 8-5: Message Tab
5.Then click “ Add ” , the window below will show “ Message ”
6.Click “ Apply ” , and “ OK ” .
Once this function is enabled and users have enabled Motion Detection on
that particular camera, a pop-up screen will appear (as below) to warn
users that the DVR has detected motion.
Figure 8-6: Message Pop-up Warning
7.Then users may click the “ Confirm ” button.