Dvorak Spider ILD01, Service Manual

Page: 21 / 98

21 / 98 SM-1 Ev4/100901
Bottom of the mower:
-
Belts from the pump pulley
- Pump pulley (ATTENTION! There is a screw lock on pulley side!)
- Hydraulic pump
Picture 34
Mounting: (Take reverse steps)
-
Glue the screw on the pump shaft (LOCTITE 243)
- Seal the contact surface of the pump and screw heads with silicone sealing
Note.
-
After exchanging the pump, you need to fill up about 0,5 l of hydraulic oil more.
- After start, slowly increase the driving speed (air in the system – high noise of hydraulic system for about
1 minute)
Picture 35
1 – screw lock
2 – pulley screw
3 – pump screws
2
3
1