-9-
sends 48 VDC power over the CAT-X cable to the receiver unit, which acts as
a PD (Powered Device). This feature eliminates the need for an external power
supply at the receiver. To maintain compatibility and interoperability with other
POH system components, these products use a sophisticated handshake
feature that prevents power exchange with non-standard (incompatible) devices.
For POH operation, connect the supplied AC Power Adapter to the 12 VDC
Power Input on the transmitter unit and then to a working AC power source.
Once the transmitter unit detects the POH compatible receiver unit, it will
provide power over the CAT-X cable. If non-POH operation is desired, simply
connect the optional AC Power Adapter to the 12 VDC Power Input on the
receiver unit. In this case, the transmitter unit no longer supplies power to the
receiver unit.
Note:
This product utilizes a locking DC power connector to prevent the power cable from
disengaging. Insert the DC plug into the power input jack on the rear panel, then gently rotate
the locking collar in the clockwise direction until it is secure. To remove the power connection,
simply unscrew the locking collar counter-clockwise and then extract the power cable.
4.3 Mounting Hardware
Above Mount
Below Mount
