background image

-1-

WARNING – Product Safety

1.

Do not dismantle the product housing or modify the printed circuit board
module as this may result in electrical shock or burn.

2.

Do not attempt to service this product yourself as opening or removing the
product housing may expose you to dangerous voltages or other hazards.
Refer all servicing to qualified service personnel.

3.

Keep this product away from liquids.  Spills into the product housing may
result in fire, electrical shock, or equipment damage.  If liquid spills into the
housing, unplug the product immediately.  Have the product checked by a
qualified service engineer before using it again.

4.

Place the product in an even and stable location.  If the product falls or is
dropped, it may cause an injury and/or malfunction.

5.

Avoid exposing the product to extreme temperatures or to high humidity
levels as this may result in damage to the product.

6.

Only use the supplied External AC Power Adapter.  The use of other power
adapters may cause this product to fail or may cause a fire.

7.

Do not twist or exert excessive force on the ends of the connected cables as
this can cause them to malfunction. Take care to ensure that all connected
cables are not forced to bend more than their minimum bend radius.

Product Liability Statement

Every effort has been made to ensure that this product is free of defects. 
DVIGear cannot be held liable for the use of this product or for any direct or 
indirect consequential damages arising from its use.  It is the responsibility 
of the users of this product to check that it is suitable for their requirements 
and that it is installed correctly.  DVIGear reserves the right to revise any of its 
hardware and software following its policy to modify and/or improve its products 
where necessary or desirable.  This statement does not affect the legal rights of 
the user in any way.

DVIGear and DVIGear & Design are trademarks of DVIGear, Inc. and may not be 
used without the prior written permission of DVIGear, Inc.

All third-party trademarks and copyrights are recognized.  HDMI™ is a registered 
trademark of HDMI LLC.  All other trademarks are the property of their respective 
holders.

© 

2007, 2012, 2014, 2017

 DVIGear, Inc.  All rights are reserved.  No part of this 

manual may be reproduced or transmitted by any form or means, electronic or 
mechanical, including photocopying, recording or by any information storage or 
retrieval system, without the prior written consent of DVIGear.

Summary of Contents for DVI-3531a
















Reviews: