-11-
5.2 Menu Navigation
Press the MENU / ENTER button to display the OSD menu. Once the menus are
displayed, use the “+” and “-” keys to navigate through the menu structure. The
“+” key will move the cursor to the right or up. The “-” key will move the cursor
to the left or down. Once the desired function has been highlighted, press the
MENU / ENTER key to select the function. Once the function has been selected,
use the “+” and “-” keys to increase or decrease the desired value, then press
the MENU / ENTER key to save the adjustment. To escape the OSD menus, use
the “+” or “-” keys to highlight the EXIT selection, and then press the MENU /
ENTER key, or simply press the MENU / ENTER key in the information screen.
For remote control access, press the MENU key on the IR Remote Control unit
to display the OSD menus. Use the arrow keys to navigate through the OSD
menus. Once the function has been highlighted, press the OK key to select it,
and then use the arrow keys to make the desired adjustment. Press the OK key
to save the adjustment. Press the EXIT key to escape from the OSD menus.
6.0 TROUBLESHOOTING
In the event that the DVI-3531a Converter / Scaler does not appear to be
functioning properly, make certain that the source and all other devices
connected to the unit are functioning correctly by connecting each source
device directly to a compatible display using a short cable. This will aid in the
elimination of a source being the issue. If the signal is present under these
conditions, make certain that the External AC Power Adapter is plugged in and
delivering power to the scaler.
The cables should be undamaged and as short as possible and of premium
quality (such as DVIGear’s Super High Resolution™ cables) as discussed in
Section 4.
As a final step, return the unit to the factory default settings by pressing the
RESET key on the IR Remote Control unit.
If the problem persists after trying the above suggestions, please contact your
dealer for additional assistance. If the dealer’s technical personnel are unable
to assist you, please contact DVIGear via telephone at 1.888.463.9927 (toll-free
for United States and Canada) or 1.770.421.6699. You may contact DVIGear by
e-mail at [email protected].
