-7-
5.5 Menu Ranges and Defaults
The adjustment range and factory preset values are as follows:
Value
Range
Default Value
Contrast
Bright
Color
Red
Green
Blue
0~255
0~255
0~255
0~255
0~255
0~255
70
130
70
128
128
128
Note: Select reset to restore all adjustments to factory default values.
H V Adjust
:
When selected, the following sub-menu appears.
H-position
84/184
V-position
30/32
Use the + and – buttons to adjust the best horizontal and vertical position of the picture.
OSD Adjust:
When this mode is selected, you can adjust the Horizontal and
Vertical position of the OSD menu.
System Information:
When selected, this shows the input/output resolutions and
their vertical refresh rate on the screen.
Auto Adjust:
When selected the DVI-3210a will automatically reset all adjustment
parameters to their factory default values.
Exit:
Select to exit from the current menu page.
Notes:
•
The default output resolution of the DVI-3210a is XGA@60 Hz.
•
The unit has non-volatile memory and memorizes all user settings before
Power OFF and recalls those settings on next Power ON; however,
changing output resolution erases all settings.
•
At any time, pr and - buttons simultaneously will reset the output
resolution to XGA@60Hz, and forces all other settings back to factory
default values.
6.0 TROUBLESHOOTING
Other than checking for faulty cables, the most common problem is choosing an
incorrect Input or Output Setting. Make sure the display is capable of handling the
resolution and refresh rate selected. Also be sure to use the correct type of cable
for the input format selected (YPbPr or RGB mode).
