ITVC Series – Intelligent Total Valve Controller IOM-ITVC-LB-04
DVG AUTOMATION S.p.A.
Legal & Operative HQ: 29016 Cortemaggiore (Piacenza) Italy, Via G. Rossetti n° 2
Tel. (+39) 0523 255811; Fax (+39) 0523 255890;
Fully Paid In Capital: Euro 1.000.000,00=
ISO
9001,
ISO
14001,
OHSAS
18001
CERTIFIED
REA 167410 - VAT 01494460338
COMPANY SUBJECT TO MANAGEMENT AND COORDINATION BY G.I.V.A. S.P.A. W ITH HEADQUARTERS IN RHO (MILAN), RECORDED UNDER NUMBER 02917180172 IN
MILAN'S REGISTER OF COMPANIES
[email protected]
www.dvgautomation.it
SHEET 25 DI 28
Local signalling:
If the battery is enabled the
HOME
page of the ITVC HMI shows the icon . The icon shows also
the charge level of battery. If the battery is
discharged
or
unconnected
the ITVC raises an
alarm
and the icon is .
The LED of pushbutton lights-up, red colour, the Open and Close actuator commands are available and work. The
alarm should be reset by the procedure described in the paragraph “Visualization of alarms and warning” of the IOM-
ITVC-Basic.
Remote signalling:
in case of battery alarm the
Monitor relay
switches-over. The auxiliary output relays R1,…,R4 can
be individually set to signal “
Low battery
”. The paragraphs “Output signalling relays” and “Output relays” in the IOM-
ITVC-Basic give the procedure to set the above relays.
Configuration options:
in the SETUP, ADMINISTRATOR menu are available two configuration options
Battery: the option “Deactivate” disables the battery, the option “Active” enables the battery
Low bat safety pos: it sets the action in case of battery alarm, stayput or close.
5.1
Setting options in the ADMINISTRATOR menu
The figure below shows the procedure to enable/disable the battery and to set the action in case of battery alarm
See the manual
IOM-ITVC-Basic
, chapter SETUP, ADMINISTRATOR to find more instruction relevant to navigation
and setting of parameters
Summary of Contents for ITVC Series
Page 2: ......
