Section 2: Set Up DVDO EDGE GREEN
26
Display Wizard - Step 3: Audio Output (Note: “Audio Out” buttons on Remote Control offer the same selection)
3a. Select an audio output connector.
You have 4 choices for audio output:
A. Auto:
Default setting.
Automatically chooses an output
depending on the capabilities
of the attached, powered-on
components.
B. Video HDMI:
Outputs audio on the
Video HDMI connector.
Use this setting if your TV has
audio capability and you don’t
have (or don’t want to use)
an AV Receiver.
C. Audio HDMI:
Outputs audio on the
Audio HDMI connector.
Use this setting if you have
an HDMI capable AV Receiver.
D. Optical:
Outputs audio on the
Audio Optical connector.
Use this setting if you have
an AV Receiver that does not
have HDMI input.
Make a selection and/or press < to exit
this screen.
You finished your Video and Audio
output setup.
Left Arrow Exits Display Wizard
