Section 1: Introduction
17
Rear Panel: Video Inputs
Flexible Component Video Inputs
This group of connectors can accept 3 types of analog component video inputs:
YPbPr Component
(2 Inputs)
This is the most common type of component analog signal. Cables are usually, 3 RCA-> RCA type.
RGBHV
RGBHV stands for “Red, Green, Blue, Horizontal Sync, Vertical Sync.
It is usually used to connect a computer’s analog VGA output using the VGA to RGBHV adapter cable.
EDGE GREEN can accept these format on RGBHV:
VGA 640 x 480 @ 60 Hz
SVGA 800 x 600 @ 60 Hz
XGA 1024 x 768 @ 60 Hz
SXGA 1280 x 1024 @ 60 Hz
RGB + CVBS
For use with a SCART breakout cable. Connect the breakout cable to a SCART connector, then connect Red, Green, and
Blue to the component inputs, and connect CVBS to the Sync input horizontally adjacent to the component inputs.
Note: SCART is primarily a European connector type. CVBS means Composite Video Broadcast Signal; typically this would
be an analog PAL or SECAM signal.
YPbPr Component
Zoom Buttons
SCART
Breakout
RGB
SCART
Breakout
CVBS
YPbPr Component
SCART
Breakout
CVBS
SCART
Breakout
RGB
Power
1a. Name your Display
VGA
(RGBHV
)
