Step 3:
Lead the wires through the hole in the wall, and put the device into the back
housing. Tighten the screw in the bottom.
Step 1:
Drill a hole for the wires to go
through the wall
Step 2:
Fix the back housing on the wall
with two screws
Step 5:
Connect the wires of power supply, unlock signal, antenna, etc. in other side
of the wall.
10
Step 4:
Locate the antenna clip on the wall with screws.
A d j u s t t h e
a n t e n n a
direction to have
the good signal
L o c a t e t h e
antenna clip on
t h e w a l l w i t h
screws.
