DV Signage POP-15N (M3-330), User Manual

Page: 7 / 14

Page 7 of 14
3.3 Slide switch
You may only choose either one way (LAN or USB) to update content without
removing SD card
3.4 Powering On
Install the SD card, however to reduce the risk of errors it is advised to have the
power off when removing or installing a SD card.
Connect the provided external AC power supply unit.
Power on the unit, the power LED should come on.
See the following section for Power On options.
3.5 Autoplay at power startup
The DV Signage PopStyle supports AutoPlay modes at power startup
AutoPlay : This is the default mode for the unit. This means that upon power-on video will start
playing in accordance with a playlist (if DV Studio was used to transfer the media files to the
SD card) or in alpha-numeric order (if the media files were simply copied to the SD card).
3.6 Playback modes
Playlist mode, i.e. using DV Studio:
When operating in playlist mode, both project file (*.prj) and playlist file (*.pll) must be
present on the SD card. These are used to control the sequence for all video tracks.
If playback does not run as expected please check that these files are present on the
SD card.
The project and playlist file are created using DV Studio software. Using this software,
you can set simple sequences or complex sequences including “jump track“ or “next
track” actions. The software can also program buttons with different functions like
“play”, “stop”, “pause”, “mute”, “previous”, “next” and “volume”.