DV Signage POP-15N (M3-330), User Manual

Page: 8 / 14

Page 8 of 14
Simple play mode, i.e. files copied to SD card without using DV Studio:
In simple play mode, the user just copies all video files (.mpg) or JPEG files (.jpg)
onto the SD card. The PopStyle will play these files in alphabetical sequence.
For JPEG files, the play time is determined by the last digit of the filename. (For
example: APPLE5.mpg, where “5” means the track will be displayed for 5 seconds.)
Note: Do not use the same filename on both Video and JPEG.
Note: Make sure all capital letters in a filename defined in playlist are consistent with the
filename on SD card. All filenames should be in 16+3 format and avoid using any characters
like “~”, “_”, “-“, etc. All content files must be stored within a folder name MEDIA. (i.e. /Media/)
3.7 OSD Configuration mode
In OSD configuration mode, you may need external buttons to operate.
Use with external button.
To enter OSD configuration mode, holding button 8 and power on the PopStyle unit.
The OSD menu screen will be shown as follow:
Firmware Version: K1.04-V3.03.00
MAC address (ID): 000562FFF11B
Date (mm/dd/yy): 4 / 22 /2011
Time (hh/mm/ss): 16 : 12 : 21
GMT (+/-hh:mm): + 0 : 0
Volume: 5
OSD: On
Datalog: On
Cancel
OK
Press button 8 to select option.
Press button 7 or button 6 for change value.
Press button 7 or button 6 to confirm “OK” or “Cancel”.