26
RMO60TD DV-Win Software
7.4 Test info
Test object
You can use the Test object field to store test results in a database, so that they could later be recalled
for analysis and comparison with previous test results.
Test information
In this field you can enter basic information about the operator, supervisor and the Job ID of a certain
test.
Environment conditions
In this field you can enter information about environment conditions such as temperature, humidity, and
pressure.
7.5 Current Mode
The way to measure the winding resistance is described in details in the RMO60TD Manual.
The winding resistance measurement can be performed using DV-Win software. If you want to analyze
these results later, you should save them on the hard disk. The table can be saved in various formats,
including XLS, so it can be later used with all Excel functions.
After all connections are properly done and DV-Win is turned on, choose the Current mode by clicking
on the
Current
tab.
Set the measurement parameters such as:
- Connections
- marking of the winding of the transformer under test
- Test current
