7
RMO200
Description
5.2 Rear Panel Components
5.3 Setting RMO200’s Language
To set RMO200’s language, use the
LEFT
button, and then
UP/DOWN
buttons to
select the
Language
menu.
Move the cursor to the bottom line using the
LEFT/RIGHT
buttons, and select the
language of your choice.
Pressing
ENTER
to confirm, returns you to the
Sing
menu.
Pressing
STOP
to cancel, returns you to the
Sing
menu.
5.4 Setting RMO200’s Time and Date
To set RMO200’s internal time and date, use the
LEFT
button, and then
UP/DOWN
buttons to select the
Time
menu.
Move the cursor to the position of your choice using the
LEFT/RIGHT
buttons, and
change the value with the
UP/DOWN
buttons.
Pressing
ENTER
to confirm, returns you to the
Sing
menu.
Pressing
STOP
to cancel, returns you to the
Sing
menu.
Connector for
mains power supply
Power switch
I
In this position, RMO200 is connected to the
mains power supply.
0
In this position, RMO200 is separated from
the mains power supply with both poles.
Equipotential connector.
For protection against parasitic currents or
voltages, always connect RMO200
equipotential connector to protective ground
(PE).
Use only the original cable.
For safety reasons, always establish this
connection as the first one before you do
any other connections, and separate this
connection as the very last one.
Figure 5-1:
The
Language
menu
Figure 5-2:
The
Time
menu showing
RMO200’s internal time and date
