5
Oxford Direct Vent / Natural Vent Gas Heater
3-90-20306762
Oxford Direct Vent / Natural Vent Dimensions
C
L
Valve Inlet
23"
(584mm)
6
³⁄₄
"
(172mm)
24
¹⁄₂
"
(622mm)
C
L
Valve
Inlet
5123
Oxford dims
28
³⁄₈
"
(721mm)
12
¹⁄₂
"
(318mm)
17"
(419mm)
4
³⁄₈
"
(111mm)
Refer to Page 7 for Flue Collar
Centerline Dimensions
Figure 1
- Oxford dimensions.
Attention
The Oxford stove is shipped from the factory as a Direct Vent Gas Heater. This heater may be converted into
a Natural Vent unit in the field. If a Natural Vent heater is desired, the FSDHAG Draft Hood must be directly
installed to the top of the unit according to the installation instructions.
When the stove is converted to Natural Vent, it uses 4” vent pipe. For aesthetic purposes the Hearth and Home
Technologies direct vent system may be used up to the ceiling.
