DC AirCube 2000 - 8
Part No 94146
2009-12-23
Safety Considerations
TECHNICAL DATA
HxWxL
970 x 500 x 340 mm
Weight 25
kg
Outlet
∅
315 mm
Hose length (extra accessories)
3 m (
∅
315)
Flow, at open outlet
1850 m
3
/h 50 Hz, 1650 m
3
/h 60 Hz
Negative pressue
max 500 Pa
Power consumption
230 V, 505 W, 115 V, 350 W
Degree of separation,
EN 60335-2-69, class H
99.995 %
EN 1822-1
HEPA 13
Soundlevel
max 62 - 74 dB(A)
Read all instructions before attempting to operate this
machine and save these instructions.
Warning!
When using electric machines, basic safety
precuations should always be
followed to reduce the
risk of fi re, electric shock and personal injury, including
the following:
1.
Work area environment
Don´t expose the machine for rain. Don´t use it in
damp or wet locations or in presence of fl ammable
liquids or gases.
2.
Overload
Never let the machine operate fully throttled. Always
follow the regulations pertinent to the material you
are working with. Don´t use the machine for purpo-
ses that it isn´t intended for.
3. Don´t abuse cord
Never pull the machine by cord. Keep cord from
heat and sharp edges. Check the electric cable regu-
larly if damage.
4.
Important measure
With cleaning and maintenance on the machine, the
power cable should be disconnected from the supply.
Only use the machine complete.
5.
Maintain the machine with care
Keep machine clean and check that the hose (extra
accessories) is entired and that all gaskets are tight.
Follow instructions. Keep handles dry and free from
oil and grease.
Make sure the micro-fi lter is
fi tted properly.
6.
Checking of damage
Before futher use of the machine it should be ca-
refully checked that the machine is un damaged. If
there are any damaged parts these should be repaired
by of a Dustcontrol authorized service center.
7.
Warning
Use only accessories and replacable parts which are
available in Dustcontrol catalogue. When using
faulty parts or pirate parts (especially fi lter) the
machine could leak out unhealthy dust which can
cause personal injuries.
