19
9.2.4 Squeegee blades: replacing
The squeegee blades collect the film of water and detergent from the floor and prepare the way for perfect
drying. With time, the constant rubbing leaves the edge of the blade in contact with the floor rounded and
cracked, reducing the drying efficiency and requiring it to be replaced.
Turning or replacing the squeegee blades:
Fig./Abb./
图
12
Fig./Abb./
图
13
Fig./Abb./
图
14
Fig./Abb./
图
15
A
1. Lower the squeegee by using the squeegee lever;
2. Remove the squeegee from its mount by completely unscrewing the two knobs;
3. Remove the suction hose sleeve from the squeegee;
4. Release the catch (ref. 3 or 6);
5. Remove the two blade retainers (ref. 2 or 7) by first pushing them towards the body of the squeegee (ref. 1)
then extracting them;
6. Remove the blade (ref. 4 or 5);
7. Reuse the same blade by reversing the edge in contact with the floor until all four edges are worn out,
or replace with a new blade, fitting it onto the screws on the body of the squeegee (ref. 1);
8. Reposition the two blade retainers (ref. 2 or 7) by centering the widest part of the slots over the fixing
screws on the squeegee body (ref. 1), then pushing the blade retainers inwards;
9. Refasten the catch (ref. 3 or 6).
10. Replace the squeegee in its support following the instructions in paragraph 6.2.
Summary of Contents for Hurricane 400 Eco
Page 25: ...24 ...
