Dustbane Hurricane 400 Eco, Operation Manual

Page: 10 / 25

9
6. Practical Guide For The Operator
6.1. Controls - Description
Fig./Abb./
图
6
CT40-CT70 C
only
CT40 R – CT70 R
CT40 B -CT70 B CT40 C -CT70 C
CT40 BT -CT70 BT CT90 BT
CT40 BT50 MICRO SCRUB / ECS CT70 MICRO SCRUB / ECS
CT40 BT60 MICRO SCRUB / ECS
Fig./Abb./
图
6
CT40-CT70 C
only
CT40 R – CT70 R
CT40 B -CT70 B CT40 C -CT70 C
CT40 BT -CT70 BT CT90 BT
CT40 BT50 MICRO SCRUB / ECS CT70 MICRO SCRUB / ECS
CT40 BT60 MICRO SCRUB / ECS
Fig./Abb./
图
6
CT40-CT70 C
only
CT40 R – CT70 R
CT40 B -CT70 B CT40 C -CT70 C
CT40 BT -CT70 BT CT90 BT
CT40 BT50 MICRO SCRUB / ECS CT70 MICRO SCRUB / ECS
CT40 BT60 MICRO SCRUB / ECS
Fig./Abb./
图
6
CT40-CT70 C
only
CT40 R – CT70 R
CT40 B -CT70 B CT40 C -CT70 C
CT40 BT -CT70 BT CT90 BT
CT40 BT50 MICRO SCRUB / ECS CT70 MICRO SCRUB / ECS
CT40 BT60 MICRO SCRUB / ECS
Fig./Abb./
图
6
CT40-CT70 C
only
CT40 R – CT70 R
CT40 B -CT70 B CT40 C -CT70 C
CT40 BT -CT70 BT CT90 BT
CT40 BT50 MICRO SCRUB / ECS CT70 MICRO SCRUB / ECS
CT40 BT60 MICRO SCRUB / ECS
Hurricane - All units
Hurricane - 400 XTT
Hurricane - 400 Eco Hurricane - 670 Eco
Hurricane - 400 XTT Traction
Hurricane - 510 XTT Traction
Hurricane - 610 XTT
Hurricane - 670 XTT
Control Unit / Diagram # Information
Battery
charge light All units / #1 Green LED on: batteries 100% to 50% charged;
Yellow LED on: batteries 50% to 18% charged;
Red LED on: batteries almost flat.
Red LED flashing: batteries completely flat; after a few seconds the brushes
Stop and the brush switch light also comes on.
Main key switch
– emergency
button
400 XTT Traction / #15
400 Eco / #15
510 XTT Traction / #15
610 XTT / #15
670 XTT / #15
670 Eco / #15
Enables and disables power to all machine functions. Acts as a safety device. To start
up the machine, turn the key clockwise. To stop the machine press the button.
Brush button
with light All units / #3 Enables (LED on) or disables (LED Off ) the “Brush” function.
400 Eco / 670 Eco: As well as enabling brush operation, pressing this button a)
automatically attaches the brushes and b) holding this button down for at least 5
seconds also selects the type of machine operation, “MICROFIBRE” with microfibre disk
or “BRUSH-PAD” with brush/abrasive disk.