Duroflame Abel, Manual

Page: 17 / 38

Page 17 from 38
Cleaning.
During this phase, the burner box is cleaned. Possible malfunctions are:

Fault: ERROR 6

Fault: ERROR 9
Pellets are loaded and the glow plug goes on.
During this phase, pellets are added and the glow plug is turned on, until fire enters
the burner.
The flue gas fan starts running more slowly. Possible malfunctions are:

Possible malfunction: No pellet supply
Ignition and stabilisation
As soon as there is ignition, the flue gas temperature will rise and the stove will
recognise this as fire. Now the stove will go into stabilisation mode for a few minutes.
This means that the stove will feed less pellets to calmly start the fire. Possible
malfunction:

Fault: ERROR 1
Pellet stove in operation
The pellet stove has successfully completed its start-up procedure and is now in
operation. The following text appears on the display of the remote control:
Fire on
Switching off the pellet stove
You can switch the pellet stove off with the ON/OFF button
You will now see the message COOL DOWN . This means that the stove is going
to cool down to a certain safe temperature. This may take a while. When the
pellet stove has cooled down sufficiently, the smoke fan (8.1.8) will stop running.