DURKOPP ADLER H868, Operating Manual

Page: 39 / 80

Operation
Operating manual H868 Version 00.0 - 07/2013 37
Key for sewing backwards (1):
If the key (1) is selected the machine sews backwards.
Key for the position of the needle (2):
If the key (2) is selected the needle moves to a specific position.
This position is determined individually via the parameter
settings. For more information see

Service manual . On
delivery, the machine setting is such that the needle is moved up
if the key (2) is selected.
Key for the start and end strips (3):
Key (3) cancels the general setting for sewing start and end strips.
If strips are switched on, pressing the key (3) disables the next
strip. If no strips are switched on, pressing the key (3) sews the
next strip.
For the general setting for sewing start and end strips, refer to the
manual

DAC Classic control .
Key for the stitch length (4):
If the key (4) is selected, the machine sews using the larger stitch
length selected at the upper adjusting wheel for the stitch length.
Key for the additional thread tension (5):
If the key (5) is selected the additional thread tension is activated.
Activating a key function:
• Press the key.
The function is activated. The key lights up.
Deactivating a key function:
• Press the key again.
The function is deactivated. The key does not light up any
more.
Transferring a key function to the additional switch
You can transfer one of the key functions to the additional switch.
Select a function that you require frequently to be able to switch
it on faster while sewing.