DURKOPP ADLER 550-532, Instruction Manual

Page: 64 / 94

Settings via software (sewing automat)
Instruction manual 550-532 - 00.0 - 07/2015 62
E 5 1 1 USB write error File with the same name
already present
• Delete or rename the file.
E 5 1 2 USB read error Data cannot be loaded from
the USB key • Check the USB key.
• Plug in the USB key
again.
E 5 1 3 USB write error Data cannot be copied to the
USB key. • Check the USB key.
• Plug in the USB key
again.
E 5 5 0 Data write error Flash memory transfer error • Main switch OFF.
• Repeat the procedure.
• Replace the mainboard.
E 5 5 1 Internal process
error
Software error • Main switch OFF.
• Repeat the procedure.
• Replace the mainboard.
• Replace the software.
E 7
7 0
3 7
5 Motor signal
error Encoder / motor has no
signal • Check the motor /
encoder.
E 7 3 6 Motor rotation
error
Motor stops after a certain
time / encoder has no signal • Check the motor /
encoder.
E 7 3 7 Z phase error Z signal no longer changes • Check the motor /
encoder.
E 7 3 8 Z phase error Z signal inaccurate / encoder
has no signal • Check the motor /
encoder.
E 9 0 7 Search error
X axis
X axis sensor not responding • Main switch OFF.
• Check the sensor.
E 9 0 8 Search error
Y axis
Y axis sensor not responding • Main switch OFF.
• Check the sensor.
E 9 1 0 Error
Clamping foot
search
Clamping foot sensor not
responding • Main switch OFF.
• Check the sensor.
E 9 1 1 Clamping foot
motor error
Clamping foot motor not
running correctly • Main switch OFF.
• Check the motor and
connections.
E 9 1 2 Internal error - • Notify DA Service
Error message Description Possible cause Remedy