Fasten metal mounting to the wall or ceiling with screw.
1.Drill 2x M6 holes to match the holes located in the Mounting Bracket.
2.Connect the hose reel to the Mounting Bracket with the Pivot Pin.
3.Pull the hose, It has 2-3 lock positions every one metre.
4.Please don't pull at the hose when it has finished.
5.Please hold the nozzle when the hose is retraction until it is finished.
6:
Trouble Shooting:
The most common malfunction is :the hose cannot be retracted automatically
after fully extending the hose.
The reason may be that:The hose end is locked as the stop anywhere
mechanism stays in the locking point,and there's no extra hose to be pulled out
for a release. There are two ways to solve this:
(1) hold the hose at the yellow waring mark and pull with a jerking motion until
the hose retracts.
(2) Place the item with its right side down, pull on the hose until it retracts.
EN
Summary of Contents for C20-037
Page 7: ......
