DURAVIT SensoWash 212051, Mounting Instructions

Page: 9 / 40

fren
6. Installation instructions
1
Inspection
> Inspect the product for damages.
8
Connecting the water
NOTICE
Malfunctions caused by deficient hoses.
> Only use the water supply hoses provided with the
product.
9
Flushing the pipes
NOTICE
Malfunctions caused by dirty pipes.
> Flush the pipes according to the local standards
and collect the water.
16
Connecting the cable
WARNING
Contact with electricity can lead to a fatal electric
shock.
> Read and observe the information given in the
safety chapter of this manual.
> Remove the insulation from the wires
approximately 10 mm (⅜").
> Connect the 3 wires to the terminal block.
Observe the L, N and PE conductors.
> Ensure that the grounding wire is 10 mm (⅜")
longer than the L and N wire.
18
Installing the junction box
> Fix the junction box in the designated place inside
the ceramic.
20
Positioning the ceramic
NOTICE
Damage caused by leaking water.
> Do not lift or rock the ceramic after placement.
> Replace the wax seal if the wax seal ist damaged
during installation.
> Ensure that the hose is not bent or kinked.
21
Risk of product damage!
NOTICE
Tightening the screws.
> Tighten the screws carefully, do not overtighten.
29
Mounting the shower toilet unit
See seperate manual.
54040_MI_SensoWash_1pWC
9