47
> Press the “Short flush” and “long flush” buttons simultaneously for three seconds.
The button lighting fades out. The buttons on the actuator plate are locked. The
buttons appear again at the end of the 2 minutes. The actuator plate is fully functional.
Deactivating/activating the night light
The night light is switched on or switched off automatically depending on the ambient
brightness. You can activate this function and also deactivate it again via your remote
control.
> Press the “Night light” preselection button on your remote control.
The left status LED on the control panel lights up blue. You now have 4 seconds to
deactivate (activate) the night light.
> Press the “OFF” (“ON”) setting button.
The right status LED flashes. The night light is deactivated (activated).
Factory setting
Setting range
Night light
active
On/Off
Table 5: Night light
Activating/deactivating the child safety lock
If the flushing buttons on the actuator plate are triggered more than five times within
2 minutes, the buttons are automatically hidden. The actuator plate is locked. The
buttons appear again at the end of the 2 minutes. The actuator plate is fully functional.
You can activate the child safety lock and also deactivate it again via your remote
control (see table 6).
> Press the “Child safety lock” preselection button on your remote control
The left status LED on the control panel lights up blue. You now have 4 seconds to
activate (deactivate) the child safety lock.
> Press the “ON” (“OFF”) setting button.
The right status LED flashes. The child safety lock is activated (deactivated).
Factory setting
Setting range
Child safety lock
Deactivated
On/Off
Table 6: Child safety lock
en
