DURAVIT Combi-System L, Operating Instructions Manual

Page: 30 / 264

30
6. Operation
NOTICE
Disinfect the whirltub system before using it for the first time, and
then after every tenth bath, but at least once a month and after a long period of no use.
6.1 Switching on the whirltub
NOTICE
Switch off the whirltub when finished.
> Switch on the main switch.
The display buttons light up briefly one after another from the "On/Off" button to the
"Foot jets" button.
> Activate the display by holding down the "On/Off" button.
! The whirltub system can only be switched on when the water level is 5 cm above the
uppermost jet.
! Turning on the air-water or water massage also activates the heater and UV hygiene
management system.
6.2 Switching off the whirltub
> Wait until the tub is completely drained and the 2-minute drying mode is finished
(Durapearl jets automatically activated, "Durapearl" button flashes).
> Switch off the main switch.
6.3 Durapearl jets
Switching on / off
> Press the "Durapearl" button.
The jets are switched on/off (air-water massage).