17
17
17
ROOF
• If an optional clear roof sheet has been supplied, this
can be fi tted in any of the middle positions. (Note
- both edges of clear roof sheet overlap standard
sheets at each side.)
• Position fi rst roof sheet into position ensuring sheet
will correctly overlap the next sheet. Edge of sheet
will be fl ush with outside edge of timber frame.
• Position sheet 500mm past front top plate fl ashing so
that sheet overlaps rear spouting as shown.
• Using one 55mm tek screw, screw roof sheet to front
top plate. Ensure roofi ng screw is screwed through
the top of the crest on corrugate profi le.(See roof
fi xing pattern below)
• Repeat using one 55mm tek screw, screw roof sheet
to back top plate through rib of corrugate, ensuring
sheet is fl ush with timber frame.
• Check that top plates and ridge beams are straight,
before screwing remaining sheets.
• Position remaining sheets, using just two screws per
sheet, until all sheets are in place.
• Screw off all sheets as shown, using 4 screws per
sheet per top plate/ridge beam.
ROOF FIXING PATTERN
ROOF SHEET
Summary of Contents for MARLBOROUGH
Page 1: ...MARLBOROUGH...
