10
10
10
TIMBER FRAME - BACK WALL
Select
1 x 3150mm Base Plate
1 x 3150mm Top Plate
4 x 2295mm Studs
3 x 990mm Nogs
• Select one 3150mm base plate
(Green), one 3150mm top plate
(Red) and four studs (Yellow).
• Lay out plates and four studs on a
fl at surface and nail together using
two 90mm nails per join. Studs are
positioned 990mm apart.
• Position nogs 1200mm up from
underside of bottom plate to centre
of nog and nail in place.
TIMBER FRAME - FRONT WALL
Select
1 x 3150mm Base Plate
1 x 3150mm Top Plate
1 x 2400mm Lintel
6 x 2440mm Studs
3 x 320mm Studs
2 x 240mm Nogs
• Select one 3150mm base plate
(Green), one 3150mm top plate (Red)
and four studs (Yellow). Lay out plates
and two studs on a fl at surface and
nail together using two 90mm nails
per join.
• Nail one stud each side of doorway
to top and bottom using the 240mm
nogs to establish correct position.
• Nail remaining two studs to inside
of studs and top and bottom plates
to make a double stud each side of
doorway opening.
320
2120
240
3150
2530
45
45
45
45
45
45
45
111
8
1132
2385
990
3150
990
990
2400
240
90
45
90
45
45
45
45
1132
1263
• Nail lintel to studs using the 320mm studs to establish correct height.
• Nail 320mm studs to top plate and lintel, spacing these evenly apart.
Summary of Contents for MARLBOROUGH
Page 1: ...MARLBOROUGH...
