Duratrax ONYX 260, Instruction Manual

Page: 4 / 16

4
Data displayed: Input, output and individual cell voltages;
peak voltage; charge current, capacity and time; battery
percentage; battery chemistry; errors and alerts
Input connections: Detachable DC lead with alligator
clips; detachable AC lead with standard plug
Output connections: Banana jacks for 4mm plugs (main);
radio jack w/ universal connector
Included output adapters: Banana to Star Plug; banana
to standard; JST XH balancing board w/ cable adapter
for each output
CONTROLS and CONNECTIONS
B
A
C
B
A
C
Touch
Screen
A. OUTPUT BANANA JACKS
For connection to a wide variety of charge adapters.
Adapters with a standard plug and Star Plug are included.
For small electric vehicle batteries, fi nd a charge lead that
best matches the type of battery you are charging. Look
for these and other charge adapters at your local retailer:
Item Number Charge Lead Description
DTXC2220 Charge Lead – banana plugs to standard
DTXC2223 Charge Lead – banana plugs to mini plug
DTXC2224 Charge Lead – banana plugs to XT90
DTXC2225 Charge/Balance Lead – 4mm Bullet
Always connect the charge lead to the charger fi rst. Then
connect the battery to the charge lead. Always match
polarities on the battery wires, charge leads and banana
jacks – black connection to black (-) and red connections
to red (+).
B. BALANCE PORT
To connect an adapter for balancing of lithium batteries.
See page 9.
C. RADIO BATTERY
To directly connect a receiver or transmitter battery for
charging.
INPUT POWER
AC Input: For indoor use, this charger includes a built-
in switching AC power supply that delivers power by
connecting the AC power cord to a common 110V AC outlet.
DC Input: This charger can be powered by a portable 12V
DC power source. Located on the left side of the charger
is a jack for the connection of the DC power cord. Once