background image

3

 

GLOSSARY of TERMS

Amps (A): 

The unit of measure for charge current.

Milli-amps (mA): 

A unit of measure for current, being amps 

(A) multiplied by 1000 and listed as “mA”. So 2.5A is the 

same as 2500mA (2.5 1000). Or, to convert mA to amps, 
divide the mA number by 1000. So 25mA is the same as 
0.025A (25 divided by 1000).

Capacity and milli-amp hours (mAh): 

The amount of 

energy a battery can store is called its 

capacity

, which 

is defi ned as how much current a battery can supply 
constantly over one hour of time. Most hobby batteries are 
rated for capacity in 

“mAh” or milli-amp hours

. A 650mAh 

battery can deliver 650mA of current for one hour (650mA 

1hr = 650mAh). A 3200mAh battery can deliver 3200mA 

(3.2A) of current for one hour (3200mA 1hr = 3200 mAh), etc.

“C” rating: 

Capacity is also referred to as the “C” rating. 

Some battery suppliers recommend charge currents based 
on the battery’s “C” rating. A battery’s “1C” current is the 

same number as the battery’s rated capacity number, but 
noted in mA or amps. A 600mAh battery has a 1C current 

value of 600mA, and a 3C current value of (3 600mA) 

1800mA or 1.8A. The 1C current value for a 3200mAh 

battery would be 3200mA (3.2A), etc.

SPECIFICATIONS

GENERAL SPECIFICATIONS

AC input:

 110 V AC 60 Hz

DC input:

 12-17 V DC

Safety/protection devices:

 Solid-state reverse polarity and 

current overload circuitry; 0-300 minute safety timer; fan

Case size:

 6.0 x 2.75 x 7.25 in (152 x 70 x 184 mm)

Weight (w/o cords):

 18.5oz (524g)

SPECIFICATIONS FOR EACH OUTPUT

Output power:

 60W

Battery types:

 1-15 NiCd/NiMH (1.2 – 18.0V); 1-6S Lithium 

(3.7 – 22.2V)

Battery capacity range:

 100-60,000mAh

Programmable model memories:

 10

Fast charge current:

 6.0A

Fast charge termination:

 Peak detection (NiCd/NiMH); 

cc/cv (Lithium)

Ni peak sensitivity:

 10 -20 mV, adjustable

Ni auto-trickle current:

  1/20  fast  charge  setting  or 

10 – 250 mA (manual)

Lithium balancing accuracy:

 5mV per cell

Lithium node current (max):

 300 mA

Display type:

 3.2-inch color touch screen

Summary of Contents for ONYX 260

















Reviews: