3
•
Clean off any dirt, rust or paint on the part you wish to
solder with the supplied tools.
•
Heat the part with the soldering iron.
•
Apply rosin-based solder to the part and melt it with the
soldering iron.
Note:
When using non-rosin-based solder, ensure you apply
a soldering paste to the part before applying the solder.
•
Wait for the solder to cool and harden
before moving the soldered part.
Note:
Lightly dampen the sponge with water before use. Before soldering, clean the tip
on the sponge and then tin the tip with fresh solder. Do not use the sponge dry.
•
Between use (or during breaks), always put the soldering iron in the holder.
•
When the soldering work is done, switch off the power first, clean the tip and tin
with fresh solder to protect it from oxidation.
•
Never file down the tips or attempt to clean using
abrasives.
