DuraTech Industries HAYBUSTER CMF-700 Operating Instructions And Parts Reference Download Page 16

Page: 16 / 233

C M F - 7 0 0

O P E R A T I N G I N S T R U C T I O N S

Safety-Alert Symbol

Read and recognize safety information. Be alert to

the potential for personal injury when you see this

safety‑alert symbol.

Section 1: Safety

The safety of the operator is of great importance to DuraTech Industries. We have provided decals, shield and other

safety features to aid you in using your machine safely. In addition, we ask you to be a careful operator who will

properly use and service your Haybuster equipment.

WARNING:

FAILURE TO COMPLY WITH SAFETY INSTRUCTIONS THAT FOLLOW

WITHIN THIS MANUAL COULD RESULT IN SEVERE PERSONAL INJURY OR DEATH.

BEFORE ATTEMPTING TO OPERATE THIS MACHINE, CAREFULLY READ ALL

INSTRUCTIONS CONTAINED WITHIN THIS MANUAL. ALSO READ THE INSTRUCTION

MANUAL PROVIDED WITH YOUR TRACTOR.

THIS MACHINE IS NOT TO BE USED FOR ANY OTHER PURPOSE OTHER THAN THOSE

EXPLAINED IN THE OPERATOR’S MANUAL, ADVERTISING LITERATURE OR OTHER

DURATECH INDUSTRIES WRITTEN MATERIAL PERTAINING TO THE CMF‑700.

1.1 Safety-alert symbols

Decals are illustrated in

Part 2: Parts Reference.

The safety decals located on your machine contain important and useful information that will help you operate your

equipment safely.

To assure that all decals remain in place and in good condition, follow the instructions below:

•

Keep decals clean. Use soap and water ‑ not mineral spirits, adhesive cleaners and other similar cleaners

that will damage the decal.

•

Replace all damaged or missing decals. When attaching decals, surface temperature of the machine must

be at least 40° F (5° C). The surface must be also be clean and dry.

•

When replacing a machine component to which a decal is attached, be sure to also replace the decal.

DuraTech Industries uses industry accepted

ISO/ANSI

standards in labeling its products for safety and operational

characteristics.

Summary of Contents for HAYBUSTER CMF-700










































































































































































































































Search results

Summary of Contents for HAYBUSTER CMF-700

Reviews:

Related manuals for HAYBUSTER CMF-700

Brands by name

Popular brands

DuraTech Industries HAYBUSTER CMF-700, Operating Instructions And Parts Reference

Search results

Summary of Contents for HAYBUSTER CMF-700

Reviews:

Related manuals for HAYBUSTER CMF-700

Brands by name

Popular brands