DuraTech Industries HAYBUSTER CMF-700 Operating Instructions And Parts Reference Download Page 20

Page: 20 / 233

C M F - 7 0 0

O P E R A T I N G I N S T R U C T I O N S

6500208

6500339

WARNING: PINCH POINT STAY BACK

WARNING:

FOR YOUR PROTECTION AND SAFETY OF

OTHERS, FOLLOW THESE SAFETY RULES.

1. Read and understand operators manual before

operating machine.

2. Place all controls in neutral, stop engine,

remove ignition key, lock out power source, and

wait for all motion to stop before servicing,

adjusting, repairing, or unplugging.

3. Read and understand all decals on machine for

your safety.

4. Keep all shields in place while machine is in

operation.

5. Keep hands, feet, hair, and clothing away from

moving parts.

6. Keep others away from machine while in

operation.

7. Install safety locks before transporting, or

working beneath components.

8. Do not allow riders at any time.

9. Do not leave machine unattended with engine

running.

10. Keep all hydraulic lines, couplings, and fittings

free of leaks during operation.

11. Keep away from overhead electrical lines.

Electrocution can occur without direct contact.

12. Review safety instructions periodically.

6500043

WARNING: NO RIDERS

SERIOUS INJURY COULD RESULT FROM RIDING ON

THE MACHINE.

Summary of Contents for HAYBUSTER CMF-700










































































































































































































































Search results

Summary of Contents for HAYBUSTER CMF-700

Reviews:

Related manuals for HAYBUSTER CMF-700

Brands by name

Popular brands

DuraTech Industries HAYBUSTER CMF-700, Operating Instructions And Parts Reference

Search results

Summary of Contents for HAYBUSTER CMF-700

Reviews:

Related manuals for HAYBUSTER CMF-700

Brands by name

Popular brands