DuraTech Industries Haybuster Balebuster 2620, Operating Instructions And Parts Reference

Page: 18 / 126

8
2 6 2 0 B A L E B U S T E R O P E R A T I N G I N S T R U C T I O N S
1.5 Safety review Section
BEFORE OPERATING
• Read and follow all instructions contained in:
a. This 2620 BALEBUSTER operator’s manual
b. Tractor operator’s manual
c. Decals placed on the 2620 BALEBUSTER.
NOTE: Additional copies of the above mentioned materials can be obtained from your dealer.
• Allow only responsible, properly instructed individuals to operate your machine. Carefully supervise
inexperienced operators.
• Use a tractor which meets the tractor requirement contained within this manual. Additional weights may
be necessary.
• Make sure the machine is in good operating condition and that all protective shields are in place and in
proper working order. Replace damaged shields before operating.
• Be sure all bystanders and other workers are clear before starting tractor and 2620 BALEBUSTER.
• Make no modifications to the machine unless specifically recommended or requested by DuraTech
Industries.
• Check periodically for breaks or unusual wear and make any necessary repairs.
• Be sure the unit is securely attached to a tractor of equal or greater weight than the 2620 BALEBUSTER
and bale.
• If required install P.T.O. safety chain, check local regulations regarding safety chain requirements.
DURING OPERATION
• Enforce the following safety precautions and others contained in this manual to prevent serious personal
injury or death due to accidental contact with rotating flails.
a. Everyone must be kept clear of work area except operator seated at tractor controls.
b. Disengage P.T.O. and make sure everyone is clear of machine before starting engine.
1.4 Shielding
Shields are installed for your protection. Keep them in place, and replace damaged shields.