manualshive.com logo in svg

DuraTech Industries Haybuster Balebuster 2620, Operating Instructions And Parts Reference, Page: 27 / 126

Share
Download
DuraTech Industries Haybuster Balebuster 2620 Operating Instructions And Parts Reference Download Page 27

17

2 6 2 0   B A L E B U S T E R

O P E R A T I N G   I N S T R U C T I O N S

3.3.3 Conveyor Speed Control

Moving the lever on the conveyor speed control valve
counterclockwise will slow the conveyor and make a
finer product. Moving the lever clockwise will speed up
the conveyor and make a coarser product.

For tractors with PFC type hydraulic systems, this valve
should be set in the full open position (clockwise
rotation). Conveyor speed can then be controlled
directly from the tractor controls.

figure 3.1
P.T.O. shield, working
(lowered) position,
maintenance (raised)
position, latch and lock

P.T.O. shield maintenance
(raised) position

P.T.O. shield locking pin

P.T.O. shield working (lowered)
position

P.T.O. shield hold down strap

flow control valve

figure 3.2
position of the flow
control valve

Summary of Contents for Haybuster Balebuster 2620































































































































Reviews:

No comments