DuraTech Industries Haybuster Balebuster 2620, Operating Instructions And Parts Reference, Page: 12 / 126

2
2 6 2 0 B A L E B U S T E R O P E R A T I N G I N S T R U C T I O N S
Introduction
Your model 2620 BALEBUSTER
TM
is designed to load and shred most types of livestock forage. It is designed
specifically for use on 6 foot diameter round bales weighing up to 2,000 pounds and 6 feet in length.
To avoid possible damage to the machine and risk of injury to the operator, consult with a DuraTech Industries
International, Inc. (DuraTech Industries) representative before attempting to shred materials other than livestock forage.
Purpose
The purpose of this owner’s manual is to explain maintenance requirements and routine adjustments for the most
efficient operation of your 2620 BALEBUSTER. There is also a trouble shooting section that may help in case of
problems in the field. Any information not covered in this manual may be obtained from your dealer.
Special Note: When reference is made as to front, rear, right hand or left hand of this
machine, the reference is always made from standing at the rear end of the machine and
looking towards the hitch. Always use serial number and model number when referring to
parts or problems. Please obtain your serial number and write it below for your future
reference.
MODEL: 2620 BALEBUSTER SERIAL NO. ________________________