31
EN
If you are very experienced and suspect a certain type of metal, turn the
controller to the corresponding position. If you want to exclude metal
waste, turn the DISC/TONE control to 12 o'clock to exclude scrap metal.
As it is sometimes diffi cult to distinguish metals in the soil, we recommend
that you carry certain metal samples, such as iron nails or coins, for
comparison. Place the appropriate sample on the fl oor and move the coil
over it, noting the DISC/TONE position at which the metal is excluded.
This way you can better judge whether the object found is a desired metal.
4.
To set the sensitivity correctly:
As a user, one usually assumes that a high sensitivity setting is better.
However, at a high SENS setting, the unit also reacts to disturbing
interference caused by power lines in the ground. Therefore, proceed as
follows: If you consistently receive a false or unstable signal from the coil
in the selected search area, set the SENS control higher.
5.
This is how you move the coil correctly:
Move the coil at a constant speed. Most
valuable metal objects send the same
signal repeatedly. If the signal cannot be
repeated, it is usually wrong. You can also
move the coil quickly over the target to get
a more stable signal. When a clear signal
is heard, use the DISC mode to determine
the metal type. Note: the display is always
for reference only, you must decide for
yourself whether or not to dig up a target
object,
