1
1 Important Notes
1.1 Product
This manual describes the installation, commissioning, and maintenance of the POWER CENTER HUB.
1.2 Target Group
This manual is only for qualified technicians, who have been trained or have demonstrated skills to install
and maintain this product under the guide of this document for safety purposes.
2 Safety
2.1 Important Safety Instructions
This product is designed and tested according to international safety requirements. The installer must read
and follow all instructions, cautions and warnings in this installation manual.
All operations including transport, installation, start-up and maintenance, must be carried out by qualified,
trained personnel.
Before installation, check the unit to ensure free of any transport or handling damage, which could affect insulation
integrity or safety clearances. Choose the installation location carefully and adhere to specified cooling requirements.
Unauthorized removal of necessary protections, improper use, incorrect installation and operation may lead to serious
safety and shock hazards or equipment damage.
Do not install the equipment in adverse environment conditions such as flammable, explosive, corrosive,
extreme high or low temperature, and humidity. Do not use the equipment when the safety devices do not work
or disabled.
Do not use the equipment if any operating anomalies are found. Avoid temporary repairs.
All repairs should be carried out using only qualified spare parts, which must be installed in accordance with
their intended use and by a licensed contractor or authorized Power service representative.
Power accepts no liability for damage from incorrect or improper operation.
2.2 Explanation of Symbols
Symbol
Usage
Disposal:
Equipment that has reached the end of its life must be collected separately and returned to an
approved recycling facility. Any device no longer required must be returned to an authorized dealer or
approved collection and recycling facility.
Caution:
Indicates directions which must be fully understood and followed in entirety in order to avoid
potential safety hazards including equipment damage or personal injury.
Note:
Indicates that the reader should stop, use caution and fully understand the operations explained
before proceeding.
FCC mark
The inverter complies with the requirements of part 15 of FCC rules.
