Duracell DRBTLC User Manual Download

Page: 7 / 8

13. Product Registration

For complete warranty coverage, please register your Duracell product

within fourteen days of purchase.

Visit DuracellPower.com/Register

or scan the QR code below to register.

WARNING: Proper application

•

Do not use the product if it is damaged or modified. Damaged or

modified batteries may exhibit unpredictable behavior resulting in fire,

explosion or risk of injury.

•

Do not operate the power pack with a damaged cord or plug.

•

Do not disassemble the power pack, contact the manufacturer when

service or repair is required. Incorrect reassembly may result in a risk

of fire or electric shock.

WARNING: Risk of explosive gases

WORKING IN THE VICINITY OF A LEAD ACID BATTERY IS

DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES DURING

NORMAL BATTERY OPERATION. FOR THIS REASON, IT IS OF THE

UTMOST IMPORTANCE THAT YOU FOLLOW THE INSTRUCTIONS

EACH TIME YOU USE THE JUMP-STARTER.

To reduce risk of vehicle battery explosion, follow these instructions in

vicinity of the battery. Review cautionary marking on this product and on

vehicle engine.

WARNING: Personal precautions

•

Consider having someone close enough by to come to your aid when you

work near a lead-acid battery.

•

Have plenty of fresh water and soap nearby in case battery acid contacts

skin, clothing, or eyes. Wear complete eye protection and clothing

protection. Avoid touching your eyes while working near a vehicle battery.

•

If battery acid contacts skin or clothing, wash immediately with soap and

water. If acid enters eye, immediately flood eye with running cold water for

at least 10 minutes and get medical attention immediately.

•

NEVER smoke or allow a spark or flame in vicinity of a vehicle battery or

engine.

•

Be extra cautious to reduce risk of dropping a metal tool onto the vehicle

battery. It might spark or short-circuit battery or other electrical part that

may cause an explosion.

•

Remove personal metal items such as rings, bracelets, necklaces, and

watches when working with a lead-acid battery. A lead-acid battery can

produce a short-circuit current high enough to weld a ring or the like to

metal, causing a severe burn.

•

When charging the internal battery, work in a well ventilated area and do

not restrict ventilation in any way.

•

Under abusive conditions, liquid may be ejected from the battery, avoid

any contact with this material. If contact accidentally occurs, flush with

water. If liquid contacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

•

Do not expose a power pack to fire or excessive temperature. Exposure

to fire or temperature above 265°F (130°C) may cause an explosion.

•

Attach output clamps to a battery and chassis as indicated in these

instructions. Never allow the output clamps to touch one another.

10. Recycling

DURACELL

is committed to environmental responsibility and recommends

that electronic devices be disposed of properly. Please contact your local city

offices for information on recycling and disposal programs for e-waste.

For instructions on how to recycle this product visit

http://www.call2recycle.org.

11. Contacting Customer Support

If you experience any problems or have any questions regarding your

DURACELL

product, free technical support is available. Prior to calling,

please review the technical support tips below. Call from a phone where you

have access to your mobile device

Be prepared to provide the following information:

- Name, address and telephone number

- Name of the DURACELL

product

- Make and model of your device

- Symptoms of the problem(s) and what led to them

Technical Support is available by telephone:

U.S. and Canada to 1-800-300-1857

Outside of the US/Canada: 1-805-437-7765

Written inquires should be directed to:

DURACELL

Product Inquiry

1380 Flynn Road, Camarillo, CA 93012, USA

Email inquires should be directed to:

[email protected]

12. Warranty and return information

Two Year Limited Warranty

The DURACELL

product carries a limited warranty against defects in material

and workmanship under normal use and service for two years from the original

date of purchase. The manufacturer or distributor, at its option, shall repair or

replace the defective unit covered by this warranty. Please retain the dated

sales receipt as evidence of the date of purchase as it will be required for any

warranty service. In order to keep the warranty in effect, the product must have

been handled and used as described in the instructions accompanying this

warranty. This warranty does not cover any damage due to accident, misuse,

abuse or negligence

Disclaimer Of Warranty

The limited warranty described herein is your sole remedy. To the extent

permitted by law, the manufacturer and distributor disclaim all other implied or

express warranties including all warranties of merchantability and/or fitness for

any particular purpose.

Limitation Of Liability

Except to the extent of repairing or replacing this product as expressly stated

in the limited warranty described herein, the manufacturer and distributor

shall not be liable for any damages, whether direct, indirect, incidental,

special,consequential, exemplary, or otherwise, including lost revenues, lost

profits, loss of use of software, loss or recovery of data, rental of replacement

equipment, downtime, damage to property, and third-party claims, arising out

of any theory of recovery, including statutory, contract or tort. Not withstanding

the term of any limited or implied warranty, or in the event that any limited

warranty fails of its essential purpose, in no event will the manufacturer’s and

distributors entire liability exceed the purchase price of this product. Some

states and provinces do not allow the exclusion or limitation of incidental or

consequential damages so the above limitations or exclusions may not apply

to you. This limited warranty gives you specific legal rights. You may have

other rights which vary from state to state and province to province.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation of this product

is subject to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for a

class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of

the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to

is a registered trademark of Duracell U.S. Operations, Inc., used under

registered trademarks of their respective holders.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of such marks by

Battery-Biz Inc. is under license. Other trademarks and trade names are those of their respective owners.

UM-DRLJS110B/DRBTLC Rev 20190807

which the receiver is connected.

• Consult the dealer or an experienced technician for help.

Changes or modifications not expressly approved by the party responsible for

compliance with the FCC Rules could void the user’s authority to operate this

equipment.

Canada IC Statement

This equipment complies with Industry Canada radiation exposure limits set

forth for an uncontrolled environment.

This device contains license-exempt transmitter(s)/receiver(s) that comply with

Innovation Science and Economic Development Canada’s license-exempt

RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference that may cause undesired

operation of the device.

Cet équipement est conforme à l’exposition aux rayonnements Industry

Canada limites établies pour un environnement non contrôlé.

Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie

Canada. Le fonctionnement est soumis aux deux conditions suivantes :

1. cet appareil ne doit pas provoquer d’interférences et

cet appareil doit accepter toute interférence, y compris celles susceptibles

de provoquer un fonctionnement non souhaité de l’appareil.