background image

Original instructions

Air series

Part D: receiving unit L

ACrs13-L (rLB)

inDex

1 Description 

 ............................................................................................................  2

Technical data  .......................................................................................................  3

Technical data sheet  .............................................................................................  3

4 Plates 

 .....................................................................................................................  4

4.1  Plates on ACRS13-L unit in a radio remote control  ..........................................  4

4.2  Plates on ACRS13-L unit in a Take & Release radio remote control  ................  4

4.3  Plates  on  ACRS13-L  unit  in  a  Multi  Units  or  Multi  Receiver                                                                                 

radio remote control  .........................................................................................  5

Light signals  ..........................................................................................................  5

5.1  POWER LED (green)  .......................................................................................  5

5.2  ENABLE LED (green)  ......................................................................................  5

6 Operation 

 ...............................................................................................................  6

6.1  Electronic module  ............................................................................................  6

6.2  DIP switches  ....................................................................................................  6

6.3  Internal light signals  .........................................................................................  6

6.4  Command outputs  ............................................................................................  6

Malfunction signalled by the receiving unit  ........................................................  7

AUTEC

LIRLBE00-03

Summary of Contents for Air ACRS13-L









Reviews: