Duracable J-MAXX Machine Manual Download Page 6

6

J-MAXX MACHINE MANUAL

The J-Maxx shown above with 19PRS, 19” polyethylene reel.  

(See options on the next page.)

Frame

The J-Maxx’s frame consists of a uni-body construction 

which allows the motor, head bearing and reel shaft 

assemblies to be bolted directly to the frame.

Electrical Wiring

The J-Maxx’s electrical wiring is located in the conduit box 

on the right side of the motor, housing both the forward/

reverse switch and the air foot switch. The Ground Fault 

Circuit Interrupter (GFCI) is built into the electrical cord 

for added safety.  The air foot pedal is standard equipment 

on The J-Maxx. This switch allows operators to turn the 

machine on and off with their foot while their hands stay 

on the cable.

RPM/Drive

The J-Maxx has a 1/3 HP motor and operates at 200 rpm. 

The heavy-duty, self-aligning head bearing for The J-Maxx 

has a cast housing which reduces stress and prevents 

premature wear.

Maneuverability

The J-Maxx has optional  6” wheels and a detachable “T” 

handle.

Cable and Reel Selections

The J-Maxx was designed to handle several reel sizes. The 

reel selected is set in place and slipped onto the reel shaft. 

Drive lugs are mounted on the drive plate and slip through 

the openings in the back of the reel. The reel is held in 

place by the revolving arm.

Standard Package

The J-Maxx’s standard package (part number J-Maxx SPA) 

comes with the following items: revolving arm, 1/3 HP 

motor at 200 rpm, 19” open metal spoke reel, 1/2” x 75’ 

cable, reel attachment, and choice of cable end fittings. 

(Wheels and handle are not standard.) See the machine 

packages and accessories chart on the next page for 

additional options. 

Information and Specifications

Machine Specifications

  

(Approximate)

Length of Machine

26”

Length of Machine with Wheels and Handle 44”

Width of Machine

13”

Width of Machine with Wheels and Handle

17.5”

Height of Machine

17”

Weight of Machine

44.5 lbs

Weight of Machine with Wheels and Handle 56.5 lbs

Weight of Narrow Wheels

13 lbs

Weight of D1S, 16” Open Spoke Metal Reel

9.5 lbs

Weight of 16PRS, 16” Polyethylene Reel

10.9 lbs

Weight of D1S1, 19” Open Spoke Metal Reel 10.5 lbs

Weight of 19PRS, 19” Polyethylene Reel

12.4 lbs

Line Size

1-1/4”-4”

Recommended Use: 

residential lines, sinks,  

bathtubs, shower drains, roof vents and laundry drains

Summary of Contents for J-MAXX

















Reviews: