3
Chapter 1 Before Operation
Copyright © 2018 Duplo Corporation All Rights Reserved
Chapter 1 Before Operation
1. Features
• This device can be used to fold paper into the following six shapes.
Single fold
Double fold
Irregular accordion
fold-out
Letter fold
Accordion fold
Gate fold
Cross single fold
Cross letter fold
Single fold
• By using the cross folding lever, it is possible to
create cross single fold and cross letter fold.
Note that the finish of cross folding is not
as accurate as that of the six folding modes
mentioned above.
2. Setting Up the Machine
2-1. Accessories
[1]
DF-850
DF-870
DF-850
DF-870
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
No.
Name
QTY
Use
[1]
Folding plate 1
1
Attached to the right upper section on the operator’s side.
[2]
Folding plate 2
1
Attached to the right lower section on the operator’s side.
[3]
Instruction manual
1
This manual
[4]
Scale label
1
Used to measure non-standard size paper. Attach the scale.
[5]
Guide plate unit
1
Used when folding B6 size fine quality paper of 81.4 g/m
2
into four.
[6]
Cross folding lever
1
For holding down the folded paper when cross fold.
[7]
L-handle hexagonal
wrench
1
Used when moving the auxiliary paper feed ring. Do not use the L-handle
hexagonal wrench for a purpose other than handling the auxiliary paper
feed ring as instructed in this manual.
[8]
Power cord
1
For EU
[9]
Power cord
1
For NA
